Archive for Paintapalooza Paintball Forum
 


       Paintapalooza Forum Index -> Paintball Talk
abr5

burp burp

ok, so i haven't shot my A-5 is god knows how long. when i aired it up, it would shoot a few good shots, then do a mini burp (like when you run out of air, only shorter) i had plenty of air. it seems like my sear just isn't catching. i checked it, and it wasn't damaged. i have a magnetic returned sear, today was the first time i have used the gun since i put it in, could this be the reason?

any suggestions?
its kinda my dads gun now, so i wanted it working so he can use it.
i'm usually really good with A-5s, but this one kinda confused me...
Sureshot3091

Did you just try the regular spring?
abr5

for the sear?
i dunno where it is, and if i switch, i would have to take of magents with would be a pain...
but if i can find the sear spring i will try it
Nickodemus

Try putting a good stiff spring under your sear. It may increase the trigger pull weight a little. I found a good compromise on my A-5 was to take out the trigger return spring (you don't need it) and put that in the sear spring spot.
I never saw a magnetic setup.
Justice

If you have an R/T check the reset pin in the trigger. If It's sticking out what seems to be too far there is your problem.
Nickodemus

Justice wrote:
If you have an R/T check the reset pin in the trigger. If It's sticking out what seems to be too far there is your problem.

Ahh didn't think about that, good idea. Once you have the trigger group opened up take a look for anything out of place.
Justice

Nickodemus wrote:
Justice wrote:
If you have an R/T check the reset pin in the trigger. If It's sticking out what seems to be too far there is your problem.

Ahh didn't think about that, good idea. Once you have the trigger group opened up take a look for anything out of place.


Ive seen it happen, not sure how they fixed it tho. I just noticed the pin sticking out all the way.
abr5

don't have an rt
anyone know where to get a stock sear spring>?
Ghostslinger

call tippmann? if its still under warranty itll be free.
edit:still call tippmann
abr5

its not under warrenty, and i did a lot to void the warrenty even if it was
Grunt_98c

does not matter....lie to them....or go here for one:

http://www.tippmannparts.com/inde...=13&searchfor=&startRow=1

or a local store...
abr5

they have everyspring but sear springs...
i will contact tippmann

       Paintapalooza Forum Index -> Paintball Talk
Page 1 of 1
Create your own free forum | Buy a domain to use with your forum