Archive for Paintapalooza Paintball Forum
 


       Paintapalooza Forum Index -> Paintball Talk
RebelShot

feedneck

I have a feeneck the only problem I have found is that the hopper sits just a tad too high for my liking, and I don't want to have to spend money to get a new one. My way to get around this (which actually has worked quite well) is to duct-tape it tight and have just a little stick the very bottom of the feed neck where the screws are located. 3 wraps and it will not move for an entire day of play, unless I need to take it off and then I just repeat the process. But now that I have the money, I probably will just get a new feedneck, duct-tape is startin to run low.. Laughing
Smitty

Wrong forum. I'll move it.
tigman250

Re: feedneck

RebelShot wrote:
I have a feeneck the only problem I have found is that the hopper sits just a tad too high for my liking, and I don't want to have to spend money to get a new one. My way to get around this (which actually has worked quite well) is to duct-tape it tight and have just a little stick the very bottom of the feed neck where the screws are located. 3 wraps and it will not move for an entire day of play, unless I need to take it off and then I just repeat the process. But now that I have the money, I probably will just get a new feedneck, duct-tape is startin to run low.. Laughing


? what gun do you have? what hopper do you have? and how does adding duct tape lower it? but thanks for the info. pics of what you are talking about would be helpful too.

welcome
You Wont See Me

I would have just suggested sanding down the feedneck on the hopper.
sinisterNorth

I would say cut/sand the feedneck. What kind of gun do you have?
RoboCop

RebelShot wrote:
Had it for over a year now and absolutely no problems...



Ups:
ACS bolt
All-American Barrel
Evo II hopper
N2 tank

Plans:
New chip or Rocking Trigger frame
g36 monkey

You Wont See Me wrote:
I would have just suggested sanding down the feedneck on the hopper.


Like you have to do for shockers w/ the stock feedneck Rambo
sinisterNorth

I'd go with a CCM lo-rise.
Justice

sinisterNorth wrote:
I'd go with a CCM lo-rise.


Yep.
RebelShot

just it

I actually got that just the other day (friday i believe), played with it on on sunday, worked amazing, didnt even budge and kept the weight distributed well.
sinisterNorth

Im glad to hear you like the feedneck. It's probably my favorite and most reccomended one. Cool

       Paintapalooza Forum Index -> Paintball Talk
Page 1 of 1
Create your own free forum | Buy a domain to use with your forum