Archive for Paintapalooza Paintball Forum
 


       Paintapalooza Forum Index -> Ideas
Pro-Litey

liter trig pull and cocking(dont do it, screwed up his gun)

ok everyone knows the pen spring thing witch is ok cause it works but not that much.so i was reading through these post on here and i wanted to try something so little by little i started to cut loops off my drive spring. in total i cut about 7or8 loops off so now with out the end cap on my pin and spring the end of the spring is even with the back of the gun(with spring in rear bolt) with all of this and my trigg and sear spring mods i have a hair trigger on my 98c i can hit about 15+ bps now. Cool Rambo Cool Rambo Cool Rambo Laughing

!WARNING! do not i repeat do not cut the spring any shorter than that and if you do and you break your gun i am in no way responsible for it.
do this mod at your own risk.
sinisterNorth

Pics?
Pro-Litey

sry no camera, i know Not cool but if you post a pic of the inside frame with out the stop on the back and the spring hanging out of the rear bolt ill paint it repost and show you where th make it.
tigman250

chrono it what's your FPS after that mod. there is a reason the spring is that long i think you'll see that you cant shoot anywhere near 280 FPS now even if your velocity screw is backed all the way out. just something you need to watch out for


ps is this mod on a pro lite or a 98?
Pro-Litey

its on both of them but the pro-lite is still harder to pull than the 98C
You Wont See Me

Tigmans right, good luck with velocities now.
Pro-Litey

ill go chron my gun and let you guys know be back in bout 30 min.
You Wont See Me

*notices after a half hour later he still hasn't responded.
Pro-Litey

sry guys my co2 was too low and i went to my cuzs but when i get my tanks filled ill post my chrono speed.
Smitty

Pro-Litey wrote:
sry guys my co2 was too low and i went to my cuzs but when i get my tanks filled ill post my chrono speed.
Ok. We'll be waiting.
sinisterNorth

Smitty wrote:
Pro-Litey wrote:
sry guys my co2 was too low and i went to my cuzs but when i get my tanks filled ill post my chrono speed.
Ok. We'll be waiting.


Yes, WE will be waiting..
RoboCop

Yes, that is right, we are still waiting.
tigman250

still.........waiting......... i feel a little like Rip Vanwinkle, i'm gonna go shave
Pro-Litey

either tomorrow or thursday ill fill my tanks and go chron but till then you guys are gunna have to wait, sry. Shocked aw damn i just remembered i have no paint left Not cool i guess i have to get some now oh well now i dont know how long itll be, probably with in a week. Thinking
tigman250

so soon? we're dying to know................wait i think we already know what the answer is......but we want to hear it from you Twisted Evil it's just the way we are Laughing
^Pirate^

Someone is going to be buying a new Maddman spring kit....
Pro-Litey

Thinking hmmmmm not me the gun is fine but when i went to chrono each shot droded 10 fps there for not enough CO2 when i get some i let you know that the gun is fine.
tigman250

well........what did you find out??
You Wont See Me

That he needs a new spring.
TriggerHappy1

Wow.
tigman250

You Wont See Me wrote:
That he needs a new spring.


springs he did it to 2 guns i think Laughing
^Pirate^

So, has he got that CO2 filled yet?
tigman250

Proooooooo-Liteyyyyyyy...............anyone heard from Pro-Litey. yawn anyone hea r d....................zzzzzzzzzzzzzzzzzzz
Roll Tide

You Wont See Me wrote:
That he needs a new spring.
Smitty

He'll need a new spring, and his velocity will be out of whack. If it does screw up, I'll delete this thread.
You Wont See Me

Theres no reason for deleting it...
Smitty

You Wont See Me wrote:
Theres no reason for deleting it...
I said only if it screws his gun up. I don't want others to screw theirs up as well.
You Wont See Me

Which is why it should stay. To show others not to do it.
Smitty

You Wont See Me wrote:
Which is why it should stay. To show others not to do it.
Ok I'll just change the title to DO NOT DO THIS MOD!
You Wont See Me

thumleft
Smitty

You Wont See Me wrote:
thumleft
Cheers
tigman250

yippee you guys saved any one else from wrecking a perfectly good gun!!! Very Happy
RoboCop

Hooray for Admins.







I feel sad, I am so low on the star system. Crying or Very sad
piant4life.

even if you cut it to much you could just go down to your local shop and get a new one
You Wont See Me

RoboCop wrote:
Hooray for Admins.







I feel sad, I am so low on the star system. Crying or Very sad
Your time may be coming grasshopper.
tigman250

piant4life. wrote:
even if you cut it to much you could just go down to your local shop and get a new one


you shouldn't cut it down at all if you can't adjust it enough with the front velocity adjuster ger the RVA no need to cut the spring Very Happy
Smitty

You Wont See Me wrote:
RoboCop wrote:
Hooray for Admins.







I feel sad, I am so low on the star system. Crying or Very sad
Your time may be coming grasshopper.
RoboCop

Yeah. I am gold. Thank you admins. One of yall made my heart skip a beat when I saw gold Embarassed
You Wont See Me

Wasn't me. Wink
RoboCop

You Wont See Me wrote:
Wasn't me. Wink
:wee: Thumbs up sunny

200 posts wOOt wOOt Cheers
piant4life.

this worked for me but the only way you can really tell is in a game when your fingers arent getting the work they did before

       Paintapalooza Forum Index -> Ideas
Page 1 of 1
Create your own free forum | Buy a domain to use with your forum