Archive for Paintapalooza Paintball Forum
 


       Paintapalooza Forum Index -> Paintball Talk
Smitty

Project Update....for now

Well I'd post pics, but our camera is broken. Both of them. THumb down Anyway, I've got quite a bit done, but I'm taking it slow and I haven't had hardly any time to work on it. I go the rear site finished. I took the blocks out of the grip frame where I believe an LCD screen goes. I got one of the dovetail type pieces on the top milled off. I've got most of the other off. I've got quite a bit of the front grip's "finger notches" off. All I really have left is to finish milling off the "finger notches", dovetail part, and maybe the back of the grip frame. Then I'll work on some mods like:

Tank O-Ring on front bolt
Lightened rear bolt
Silent Sear or Ortho Rubberband Sear (Maybe)
Ported feedneck
Hopper Wobble
Maybe some sort of custom feed
Paint
Maybe Airsoft Body modded to it or custom made parts (mag, stock, ect.)

Any thoughts/comments/suggestions?
tigman250

i would stay away from lightening the rear bolt, i did mine in attempt to make a LP kit and all i got is a rear bolt that looks like it was shot with buckshot! no real gain....mabey a little less recoul but hardly worth all the effort. i would strongly recomend some type of center feed, that is if you plan on speeding it up, if you don't plan on an RT or e-bolt leave it stock. but if you are going to juice it up CENTERFEED THAT TIPPY!! you won'y be sorry.

good luck Smitty can't wait to see pics!
Smitty

What I want to do is find a feedneck that I can weld on and then cut it in half so it still lets the reciever halves to apart. No luck finding one yet.
RoboCop

Re: Project Update....for now

Smitty wrote:
I took the blocks out of the grip frame where I believe an LCD screen goes.

I believe those are the slots for the battery and such of an e-grip, not an LCD screen.
Smitty

Re: Project Update....for now

RoboCop wrote:
Smitty wrote:
I took the blocks out of the grip frame where I believe an LCD screen goes.

I believe those are the slots for the battery and such of an e-grip, not an LCD screen.
Oh. Ok thanks. For me they're just added weight. I might try to pick up a cheap R/T though.
sinisterNorth

Sounds like its coming along nicely. You'll have to get pics up once the cameras are fixed.
g36 monkey

sounds awesome smitty and you are in the right place to get some info on this stuff Laughing

       Paintapalooza Forum Index -> Paintball Talk
Page 1 of 1
Create your own free forum | Buy a domain to use with your forum