Archive for Paintapalooza Paintball Forum
 


       Paintapalooza Forum Index -> Marker Gallery
RoboCop

RoboCop's second gun



It is a bad pic but later tonight I should have a clear one up. I just couldn't wait to get it on. I also forgot to put on there : polished internals and 11 in. barrel, and tougher finish. It is a great gun and shoots super fast.

Enjoy

Here is a cool looking pic of it.
rossy11223

Nice gun! Thumbs up Thumbs up
TriggerHappy1

Very nice, plan on any more upgrades?
RoboCop

Well soon I will be getting HPA. Then I will probably get a new barrel. And if I plan to stick with Tippmann, I will get a gas through grip and the LPK. After that, I would be done. Oh ya, I might get the victory board for the Halo. I don't plan on getting the equalizer board. After all that, I will have a really nice Tippmann. Laughing Very Happy
sinisterNorth

Very nice looking gun. The victory board will be a nice addition. Post more pics when you're finished upgrading it.
Grunt_98c

looks like a good start...9.0 out of 10....needs a center feeder...
RoboCop

I see no reason for a center feed when my Halo can push 20+bps and I will only be going up to 15 max, unless the equalizer board's price goes down to about $50.
Grunt_98c

with the stock feed..i read from a thread NN did..all hoppers are capped at 13bps or 14bps(forget)because of elbow....
RoboCop

The Halo forces it into the gun, I doubt that it limits it to 13 or 14 because i had turned up my full auto up all the way (15bps) It didn't chop. I will try to get a vid of it up as soon as I can. Anyways, I want to get a higher end gun sometime, so I don't want to waste all my money into uping a Tippmann. Anyways what about the other guns that are ripping 18+ bps on the Oddesey website that have the elbows on them?
TriggerHappy1

(See my 98 RT video)
Grunt_98c

quote:
Updated: ROF, Hoppers, feed necks, mechanical, RT and E-bolt.
Hoppers: obviously, the faster the hopper, the faster you will be able to shoot. Their are several limiting factors however.
Feed neck: Since it is at a 45 degree angle, this already slows down how fast you will be able to shoot. Laws of physics (trigonometry) determines this. It is now commonly known, that on vertical feed guns (non forcefed) the fastests ROF acheivable is 13-14 bps. After some math you will find that with a right feed about 10 bps is max. Now amount of blowback, angle your gun is being held at, and type of hopper can affect this.
Need for speed: The only way to shoot faster than roughly 10 bps on a Tippmann is to get a HALO B (or HALO A if you insist)or Warpfeed. On a mechanical/RT trigger 98, you can burst 5-8 balls at 18 bps. For some reason if you want to do a long string about 16 bps is the fastest you can shoot before the gun pinches or chops a ball.
E-Bolt: Super fast paint slinging machine... Sort of. While the trigger is very easy to pull, and has many modes of fire, you will only shoot about 10 bps with a GOOD hopper. Even with a HALO B you are limited to about 11-12 bps. Why? Because once the E-Bolt starts to cycle that fast, it makes incomplete cycles. It only returns enough for the ball to fall 1/3 of the way into the breech, then it fires again. Chop-suey.
RoboCop

I was going to say about your r/t vid, but I wasn't sure if it was a stock feed. It's a great vid. My 98 custom is having problems. The gun just doesn't want to cock all the time, and I can't get it to go full auto anymore. It will only take like 2 shots or 3 then the full auto stops. THumb down I have been looking at it constantly, trying to see if anything is worn or whatnot. I oiled up the r/t the other day. It wasn't really helping that much. I will have to test my r/t tomorrow and check for leaks and look at springs. I wish the place that installed my r/t wouldn't take all the parts that aren't used anymore away from me. Rambo Everytime I get something done over there. If they install something new and take something else out, they take my parts. I get so mad aaargh
Hey TH1, do you have the lp fittings? What all do you need to get to get the super r/t. are they new fittings and a new r/t hose? I am a little confused, because I want my r/t to come alive again.
TriggerHappy1

.....

I shot a steady 15bps with my 98RT and TSA.

I have seen with my own eyes an E-98 over a chrono doing 15bps.
Grunt_98c

i don't know i just read it....i would think NN is right...
Sureshot3091

RoboCop wrote:
I was going to say about your r/t vid, but I wasn't sure if it was a stock feed. It's a great vid. My 98 custom is having problems. The gun just doesn't want to cock all the time, and I can't get it to go full auto anymore. It will only take like 2 shots or 3 then the full auto stops. THumb down I have been looking at it constantly, trying to see if anything is worn or whatnot. I oiled up the r/t the other day. It wasn't really helping that much. I will have to test my r/t tomorrow and check for leaks and look at springs. I wish the place that installed my r/t wouldn't take all the parts that aren't used anymore away from me. Rambo Everytime I get something done over there. If they install something new and take something else out, they take my parts. I get so mad aaargh
Hey TH1, do you have the lp fittings? What all do you need to get to get the super r/t. are they new fittings and a new r/t hose? I am a little confused, because I want my r/t to come alive again.


did you try just dropping a couple of drops of oil in the ASA? Oh yea nice vid by the way EDIT: I mean pic....sorry!
RoboCop

I always drop some oil in the ASA. Sometimes I just get so mad at my 98 Custom but then I look at my Custom Pro and give a big Very Happy
Sureshot3091

RoboCop wrote:
I always drop some oil in the ASA. Sometimes I just get so mad at my 98 Custom but then I look at my Custom Pro and give a big Very Happy


Yea i figured you would know to do that but I was just throwin somethin out there.....
RoboCop

Yah, I got it to work today. I put a tank on and started shooting, then bamb, I had a line of about ten shots. IT WORKS! After that, my tank was too low to do much more than just about 3 shot bursts then it did one shot per pull. It uncocked or didn't fully cock, a couple of times. That was ok, because I was used to that when I first got my r/t. I still love my Custom Pro more. I'll try my best to get a vid up as soon as possible of the Custom Pro. Also, new clearer pics should be up pretty soon of the Custom Pro.
RoboCop






Ahh, who is that? Laughing

In the second pic, my field is in the background. My field has more stuff that you can't see and also today, I had moved around some stuff. My field is never the same.
RoboCop


That is my field. It shows more of the left side of the field.


That shows more of the right side. The right has a snake which will be shown later.

       Paintapalooza Forum Index -> Marker Gallery
Page 1 of 1
Create your own free forum | Buy a domain to use with your forum