Archive for Paintapalooza Paintball Forum
 


       Paintapalooza Forum Index -> Upgrade Help
TriggerHappy1

Well Im an idiot

Messing with my new Halo B just now. I took out the screw on the drive cone ( I think thats what its called, the cyclone clear thing that spins). Now its not spring loaded. Dont know what to do, what should I do!!??
You Wont See Me

Find someone that knows what they're doing?

Do you have a proshop that you could ask?

Theres always the manufacturor.
Grunt_98c

what does the halo b have??? rip or a vic board ????
Smitty

You Wont See Me wrote:
Find someone that knows what they're doing?

Do you have a proshop that you could ask?

Theres always the manufacturor.
Yeah. Man that sucks.
cdacda13

Well, I dont know.
Diceman

Well ya learned a lesson out of this Laughing
TriggerHappy1

Nevermind, fixed it.
Smitty

TriggerHappy1 wrote:
Nevermind, fixed it.
WOOHOO! Trigger to the rescue!
Grunt_98c

TriggerHappy1 wrote:
Nevermind, fixed it.

good...whats the halo b for, which gun????
TriggerHappy1

I rescued myself!
sinisterNorth

Glad it's working now.
TriggerHappy1

For any of my guns really. Its probaly the most practical for my 98 though because the RT shoots around 20bps.

Now I know the guts of Halo Bs.
Smitty

TriggerHappy1 wrote:
For any of my guns really. Its probaly the most practical for my 98 though because the RT shoots around 20bps.

Now I know the guts of Halo Bs.
You learned the hard way. Wink
rossy11223

Your pretty bold for messing with that stuff. I wouldn't even touch it. Laughing
tigman250

TriggerHappy1 wrote:
Nevermind, fixed it.


when i started reading this thread i knew you would figure it out.
TriggerHappy1

The only way I learn things is through experiance. I guess thats how I know so much about this stuff.
cdacda13

The best why to learn, it to break it apart.
I ripped my angel into piece the first day I got it. Got it back together, it worked. I learned.
TriggerHappy1

!

I would just love to take apart a gun like that and see it all inside.
cdacda13

Re: !

TriggerHappy1 wrote:
I would just love to take apart a gun like that and see it all inside.

At first, I was scare. After I got the board out and the trigger frame off, it was easy.

The only gun I screwed up by breaking it down, was my mag.
You Wont See Me

I had troubles getting my A-5's internals back in it when I first got it. Embarassed
TriggerHappy1

The first time I took apart my 98 I was very scared. It was cocked and I lost the drive pin and spring, but found it, I couldnt figure out where to put the trigger assembly pins and I lost a few, then when I figured out where it should go, I put my gun back together forgetting the ball latch and buffer o-ring, fixed that put the screws back in, noticed my front site was wrong, fixed that, noticed my ball latch was wrong. I was a pain in the ass.

My Mag was very easy, never had trouble with that, same with my cocker.
tigman250

all of my paintball guns were disasembled even before i shot them some of my rifles too my dad used to laugh at me he said i spent more time taking my bb gun apart than i did shooting it (i doubt it i wore out 2 of them, if only i had a nickel for every sparrow i ever shot) Rambo
Glassjaw

Why Halo B? I have heard so many bad things about it, I would have personally ampted out for the Reloader B. Let me/us know how it works in the future.
RoboCop

The first time I took apart my Halo B completely, it was simple but somewhat confusing. My drivecone wasn't springloaded after I took it apart. I was looking at the drivecone and the cup area. After I saw the parts that stick out of the drivecone on the bottom, I figured out how to put it all together. My next problem was getting the screw on top of the drivecone to stay in. I pushed the drivecone down and i heard like a click, so then the screw stayed in. I didn't panic but it was very frustrating.

When I took my 98 Custom apart, I found it easy. Now when I took an A-5 apart yesterday to find out what was wrong with its R/T, I was very confused. It is more complicated than it needs to be. Such as the vert adapter is loose and it just slides in, I found that a bad way of construction. I had to push the bottom part of theexpansion chamber on it forward so when the air could seal it up. I found a leak in the r/t but I tuned it just perfectly so it will get a good 10 bps out of it. The guy was happy with that.

       Paintapalooza Forum Index -> Upgrade Help
Page 1 of 1
Create your own free forum | Buy a domain to use with your forum